
Dipl.-Ing. Thomas Bigler
Wissenschaftlicher Mitarbeiter - Zentrum für Verteilte Systeme und Sensornetzwerke
- thomas.bigler@donau-uni.ac.at
- +43 2622 23420-46
- +43 2622 23420-99 (Fax)
- Zum Kontaktformular
- TFZ Wiener Neustadt, Bauteil E - Stock 2
- Universität für Weiterbildung Krems
- Zentrum für Verteilte Systeme und Sensornetzwerke
- Viktor Kaplan Straße 2 - Bauteil E
- 2700 Wiener Neustadt
- Österreich
Zur Person
Nach Abschluss seines Studiums der Computertechnik an der Technischen Universität Wien im Jahr 2011 arbeitete Thomas Bigler zunächst an der Österreichischen Akademie der Wissenschaften und seit 2012 am Zentrum für Verteilte Systeme und Sensornetze am Department für Integrierte Sensorsysteme der Donau-Universität Krems. Viele seiner bisherigen Forschungsprojekte beschäftigten sich mit hochpräziser und robuster Taktsynchronisation in verschiedenen Anwendungsbereichen, wie ToF 3D-Kameras, MIMO-Systemen oder wide-area Computernetzwerken. Weitere Schwerpunkte seiner Forschungstätigkeit sind Zeit- und Feldstärkenbasierte Lokalisierungsmethoden, die auch in industriellen Umgebungen eingesetzt werden können, IoT- und Mesh-Kommunikationstechnologien (z.B. Bluetooth, Zigbee, Thread) aber auch das relativ neue Thema der Wearables und intelligente Textilien. Er beschäftigt sich hierbei auch mit chiplosen Antennendesigns auf textiler Basis. Seine Interessenschwerpunkte und Aktivitäten in den Projekten liegen im Bereich Embedded Systems, dem Design von Elektronik für Hardware, FPGA-basierten Systemen und Algorithmendesign.
Projekte (Auszug Forschungsdatenbank)
Intelligente Dienste und IoT Konnektivität für Gemeinden im ländlichen Raum
Analysesystem für die in-vivo-Inspektion von Wafern in der Halbleiterindustrie
Lokalisierung mittels gerichteter Antennen im industriellen Internet der Dinge
Elektronische Horizonte in Verkehrsinfrastrukturen auf Basis von digitalen Zwillingen
Trustworthy loT for Cyber-Physical-Systems
Abwehr unbemannter Flugsysteme für Behörden und Organisationen mit Sicherheitsaufgaben
VivaBack - Biomechanischer Sensor zur Vermessung der Wirbelsäule
HIgh Precision and RObustness in Network Synchronization
Publikationen (Auszug Forschungsdatenbank)
Vogl, L.; Sauter, T.; Treytl, A.; Bigler, T. (2022). Work in Progress: Side-Channel Watermarking for LoRaWAN Using Robust Inter-Packet Timing: An experimental approach. In: IEEE, Proceedings in 2022 IEEE 18th International Conference on Factory Communication Systems (WFCS): 1-4, IEEE, Pavia
Weissbacher, M.; Sauter, T.; Bigler, T.; Treytl, A. (2022). The Effect of Carrier Mismatch on RSS Ranging and Localization. In: IEEE, 2022 IEEE 18th International Conference on Factory Communication Systems (WFCS): 1-8, IEEE, Pavia
Stenzl, R.; Wilker, S.; Sauter, T.; Nagy, A.; Bigler, T.; Treytl, A.; (2021). Radio map upscaling - adding antennas in an indoor localization scenario. In: IEEE, Proceedings in 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), 2021: 1-4, IEEE, Vasteras, Schweden
Bigler, T.; Kovács, G.; Treytl, A.; Windl, R. (2020). NFC for Powering Sensors in Concrete. In: IEEE, Proceedings for the IEEE International Conference on Emerging Technologies and Factory Automation (ETFA): 10.1109/ETFA46521.2020.9211889, IEEE, Wien
Bigler, T.; Treytl, A.; Sauter, T. (2020). Side-Channel Watermarking for LoRaWAN Using Robust Inter-Packet Timing. In: IEEE, Proceedings for the IEEE International Conference on Emerging Technologies and Factory Automation (ETFA): 10.1109/ETFA46521.2020.9211875, IEEE, Wien
Nagy, A.; Bigler, T.; Treytl, A.; Stenzl, R.; Wilker, S.; Sauter, T. (2020). RSS-based Localization for Directional Antennas. In: IEEE, 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA): 774-781, IEEE, Wien
Stenzl, R.; Wilker, S.; Sauter, T.; Nagy, A.; Bigler, T.; Treytl, A. (2020). Work-in-Progress: Usage of clustering algorithms for analysis of radio maps for localization using directed antennas. In: IEEE, 2020 16th IEEE International Conference on Factory Communication Systems (WFCS): 1-4, IEEE, Porto, Portugal
Nagy, A.; Bigler, T.; Treytl, A.; Sauter, T. (2019). A Radio-Map clustering Algorithm for RSS based Localization using Directional Antennas. In: Proceedings of 2019 15th IEEE International Workshop on Factory Communication Systems (WFCS): 1-4, IEEE, USA
Bigler, T.; Treytl, A.; Löschenbrand, D.; Zemen, T. (2018). High Accuracy Synchronization for Distributed Massive MIMO using White Rabbit. InProceeding; International IEEE Symposium on Precision Clock Synchronization for Measurement, Control, and Communication 2018, IEEE
Bigler, T.; Treytl, A.; Kienmayer, C. (2017). Increasing Localization Robustness using Directional Antennas. IEEE, 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2017: 10.1109/ETFA.2017.8247765
Mahmood, A.; Bigler, T.; Sauter, T. (2016). Investigations on Packet Delay Variations over the Wireless Channel. Conference Paper for12th IEEE World Conference on Factory Communication Systems: 1-4
Puhm, A.; Mahmood, A.; Bigler, T.; Keroe, N. (2016). Synchronizing an IEEE 1588 slave clock over both paths of a redundant Ethernet system. IEEE International Symposium on Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS): 1-6
Ring, F.; Bigler, T.; Exel, R. (2015). Synchronization Robustness using Kalman-based Clock Servos. Precision Clock Synchronization for Measurement, Control, and Communication (ISPCS), 2015 IEEE International Symposium on: 64-69
Exel, R.; Bigler, T.; Sauter, T. (2014). Asymmetry Mitigation in IEEE 802.3 Ethernet for High-Accuracy Clock Synchronization. Instrumentation and Measurement, IEEE Transactions on, Vol. 63, no. 3: 729-736
Exel, R.; Bigler, T. (2014). ToA Ranging using Subsample Peak Estimation and Equalizer-based Multipath Reduction. IEEE WCNC'14: 2964-2969
Exel, R.; Bigler, T.; Sauter, T.; Ferrari, P.; Rizzi, M.; Flammini, A. (2014). Timestamping of IEEE 802.15.4 CSS by CORDIC-based Chirp interpolation. Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International, Vol. 604, no. 609: 12-15
Han, Sangjin; Agrawala, A.; Mah, M.; Exel, R.; Bigler, T. (2014). Clock Synchronization – An Approach using Mapping Functions. European Wireless 2014; 20th European Wireless Conference; Proceedings of, Vol. 1, no. 7: 14-16
Mahmood, A.; Ring, F.; Nagy, A.; Bigler, T.; Treytl, A.; Sauter, T.; Kerö, N. (2014). High Precision and Robustness in Network-based Clock Synchronization using IEEE 1588. 2014 IEEE Emerging Technology and Factory Automation (ETFA): 1-4
Bigler, T.; Exel, R. (2013). Out-of-band asymmetry removal for high accuracy clock synchronization in 100Base-TX. Precision Clock Synchronization for Measurement Control and Communication (ISPCS), 2013 International IEEE Symposium on: 29--34
Vorträge (Auszug Forschungsdatenbank)
NFC for Powering Sensors in Concrete
IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) 2020, 10.09.2020
Side-Channel Watermarking for LoRaWAN Using Robust Inter-Packet Timing
IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) 2020, 10.09.2020
Out-of-band asymmetry removal for high accuracy clock synchronization in 100Base-TX
2013 International IEEE Symposium on Precision Clock Synchronization for Measurement Control and Communication (ISPCS), 25.09.2013